π
CAT Q3 2023 Earnings Call
October 31, 2023 at 12:00 AM
π
Company
CAT
Quarter
Q3 2023
Date
October 31, 2023 at 12:00 AM
Speakers
2
Word Count
~8,519
Transcript Content
Operator
And your first question comes from Michael Feniger with Bank of America. Your line is open.
Speaker
Thank you for taking my question. Given the current backlog, you've mentioned that easing supply conditions are affecting lead times and orders. As these conditions normalize, do you foresee the backlog consolidating at these levels and then increasing? You noted some capital discipline with customers. Jim, considering current commodity prices for oil, iron ore, and copper, do you believe this will be enough to drive growth in 2024? Thank you. Jim Umpleby (Chairman): Yeah, as I mentioned, we do expect another good year in 2024, and we'll provide more detail in January. We talked about this a bit in our last quarterly call. Our backlog is higher than it normally would be because our lead times are higher than I'd like them to be frankly, and what we've talked about is as supply conditions continue to improve, we expect lead times to come down, which should have a corresponding impact on our backlog. Our backlog should come down, so that's a positive thing. If you look at our backlog over a number of years, it's still elevated compared to where it normally would be based on revenue. So again, we do feel good about market conditions and we expect that as we improve lead times, that backlog as a percentage of revenue would come down to more normal levels. Andrew Bonfield (CFO): Yeah, let me just give you some numbers to add to that. I mean, if you look at the backlog as a percentage of trailing 12-month revenues in the period of 2017, it was 37%, in 2018, it was 32%. Currently today, it's around 44%. So, backlog still is elevated based on historic trends, and remind you also that services revenues now are a higher proportion of our total revenue base as well.
Operator
And we will take our next question from Tami Zakaria with JP Morgan. Your line is open.
Speaker
Hi, good morning. Thank you so much. So, staying on backlog⦠Jim Umpleby (Chairman): Morning, Tami.
Speaker
Thank you. Staying on backlog, I think orders were down in the third quarter. Have you seen any improvement in order trends quarter-to-date, or if orders continue to be down, what would support a good year in 2024, like you mentioned in your call? Jim Umpleby (Chairman): Yeah. Again, we expected some moderation in order rates based on, again, improving availability, so that wasn't a surprise to us. Again, what would give us another good year in 2024 is market conditions. I mean, again, if we look at where we are in most of the markets we serve, we feel quite good, starting with just with Construction Industries in North America, the infrastructure investments that are being made by the government, although we are starting, we have seen some benefit of that, we expect more benefit in 2024 residential, although the growth rate has continued to moderate in North America, it is still growing, and oil and gas still remains quite healthy for solar turbines. Gas compression in oil and gas is strong as well. So, again, there's a lot of positive things. Power generation, data center growth, continues to provide a tailwind as well. So again, the market conditions would lead us to believe that we'll have another good year next year. Andrew Bonfield (CFO): And, Tami, just to add, again, a little bit more. Remind you that specifically in the third quarter, there were two factors which did impact order rates, one which is, obviously, as we've talked about the CAT engine changeover for a number of quarters, that happening in the fourth quarter. If you think about when dealers will place orders for BCP machines, they would tend to impact us in the third quarter, which is why we saw those order rates decline. Similarly, we also saw some excavator orders decline in anticipation of dealers reducing their inventory levels as well. So overall, those are specific factors in the third quarter results, which actually moderated the overall order rates as well. Jim Umpleby (Chairman): I want to add a comment about the BCP changeover. We intentionally limit the number of orders because we have a set number of machines being manufactured before transitioning to the new model. We then stop taking orders once we reach our allocation limit and have not yet reopened for the new model. This helps clarify the decrease in order rates for BCP during the engine changeover. Additionally, we have mentioned that we expect dealers to reduce their excavator inventory, which will also lead to a lower order rate for CI excavators. Therefore, none of this is unexpected.
Operator
And we'll take our next question from Rob Wertheimer with Melius Research. Your line is open.
Speaker
Yes, hi. My question is on resources, and it's going to be basically on business model, revenue model, and margin. And so, you announced the deal with Freeport today on retrofit of autonomous mining trucks, and I know you've had retrofit for a while. I don't recall an announcement quite this big, although maybe I've missed one or two. But the question is, really, as you see deals like that, you deliver value to customers through autonomous operations, saving direct and indirect costs, how do you think about margin support for you guys? And then, how do you think about market share going forward? I think a year ago, you'd sort of run a large majority of autonomous mining contracts, or tenders out there, and I'm wondering if you can give us an update on that. So kind of market share margin and business development. Thank you. Jim Umpleby (Chairman): Absolutely. We have previously expressed our strong confidence in our autonomous solution. We believe we offer the best solution in the industry due to our trucks' faster operation, enabling our customers to produce more commodities within a 24-hour timeframe. We are continuously investing in our autonomous capabilities, which is enhancing our value proposition and leading to orders like the one announced this morning. Our focus is on delivering more value, not just competing on costs, to make our customers more successful. Our mining customers are demonstrating capital discipline, which is expected. We are seeing high levels of quotation activity and a low number of parked trucks. Considering the energy transition alongside our autonomous solution, we are optimistic about the future of Resource Industries, especially in mining.
Operator
And we'll take our next question from David Raso with Evercore. Your line is open.
Speaker
Thank you for your time. I have a question regarding the fourth quarter margins. I understand your usual framework for margin guidance, but the implications for EPS seem quite broad. I'm looking for clarification on the margins in CI and RI, which I believe you mentioned are slightly below the third quarter, with E&T being similar. Given your sales projections for the fourth quarter, I'm trying to determine if margins year-over-year are expected to increase. Is that correct? However, the slight decrease in RI and CI appears to suggest a decline of only 100 to 150 basis points sequentially. I apologize for the detailed nature of my question, but the range seems quite wide, and I want to ensure we have a clear understanding. Thank you. Andrew Bonfield (CFO): Thank you, David. We recognize that our situation is somewhat unique. Looking at it sequentially and year-over-year, we expect both CI and RI margins to decline. Typically, there is seasonality for both. However, the impact of dealer inventory on CI is expected to intensify this decline more than usual. For E&T, we foresee margins staying relatively flat compared to the third quarter due to product mix and the timing of low-margin international rail deliveries. Year-over-year, we anticipate margin improvements for CI, RI, and E&T, though increased corporate items from the true-up of incentive compensation might partially offset this. Additionally, we expect favorability in other income and expenses because last year we experienced a significant one-time charge for currency translation losses in the fourth quarter. I hope this provides a clearer picture of our margin guidance.
Operator
We will take our next question from Steven Fisher with UBS. Your line is open.
Speaker
Thanks and good morning. Clearly, we have had great margins this year. Pricing is a significant driver right now, but as you've mentioned, it's starting to moderate year-over-year. I'm interested in your strategy for navigating a lower pricing growth environment moving forward. How much do you believe you can enhance your focus on costs there, and if that's a central part of your plan, what do you see as the greatest opportunities for cost savings next year? Or do you think a tighter balance between price and cost is simply the new normal? Jim Umpleby (Chairman): Thank you, Steven. As we mentioned, we expect pricing to ease as we compare it to last year's increases. We are constantly striving for a lower cost structure and are exploring ways to reduce structural costs. Many back-office tasks are now performed in lower-cost countries, and more engineering is done in those regions as well; we are seeking improved efficiency. Although our supply chain has improved, we still encounter some challenges and unexpected costs due to inefficiencies from shortages. I believe there is still an opportunity for us to enhance operational efficiency in our manufacturing processes and reduce structural costs. We aim to make cost reduction a continuous effort moving forward.
Operator
And we will take our next question from Tim Thein with Citigroup. Your line is open.
Speaker
Good morning, and thank you for the opportunity to speak. Continuing on the topic of pricing and looking ahead to 2024, I would like to understand the competitive landscape, particularly in CI, where we have numerous global competitors. With the dollar-yen exchange rate at nearly its highest in a decade, could you share your observations and the insights from your dealers regarding competitive dynamics? How do you foresee this impacting pricing as we move into 2024? Thank you. Jim Umpleby (Chairman): There are many factors at play. One of the main ones is the strength of the market. In North America, we feel positive about the market conditions due to infrastructure spending and ongoing growth in residential sectors. Competition is something we have always faced and will continue to face. Our pricing decisions are influenced by various factors, including input costs and competitor actions. We approach pricing with a range of considerations rather than a single major decision. Our goal is to maintain competitive pricing while offering value. While nobody wants to increase prices, the inflationary cost environment over the past few years has made it necessary. We focus on adding value through technology that enhances our customers' efficiency, especially in light of the labor shortages. The technology we are incorporating into our Construction Industries products enables less experienced operators to be more effective quickly. Additionally, we are investing in our digital and service capabilities to minimize unplanned downtime and boost productivity. We understand that the competitive landscape is always changing, but we are confident in our ability to continue competing effectively.
Operator
And we will take our next question from Nicole DeBlase with Deutsche Bank. Your line is open.
Speaker
Yeah, thanks. Good morning, guys. Jim Umpleby (Chairman): Good morning, Nicole. Andrew Bonfield (CFO): Good morning, Nicole.
Speaker
Just on the parts demand, noticed that you guys caught out a decline in aftermarket parts in resource as a driver of volume decline there. If you could talk a little bit about that? And then any color on parts demand in construction or E&T? Thank you. Andrew Bonfield (CFO): Yeah, Nicole, thank you. Within Resource Industries, the volume did decline. It doesn't necessarily mean the absolute dollar value declined, but the volume decline was partly due to dealer buying patterns. And so that was a factor within resources. Overall, we're still very comfortable with the growth rate of aftermarket parts volumes. And we'll give you the update as per normal, as I said in my remarks, in January. But overall, services revenues still continue to grow and are a very good factor for us, as you know, given our drive to double services revenue to $28 billion by 2026. Jim Umpleby (Chairman): And dealer sales to customers were up in the quarter.
Operator
And we will take our next question from Chad Dillard with Bernstein. Your line is open.
Speaker
Hi, good morning, guys. Jim Umpleby (Chairman): Hi, Chad.
Speaker
More of a bigger picture question. So I was hoping you could give us an update on your approach to rental. So to what extent are you looking to expand your footprint through dealers in this channel? And if you can share how much of the sales today come through this channel today? And then if we do see any near-term air pocket, do you think any expansion could provide an offset? Jim Umpleby (Chairman): We see rental as a growth opportunity and are collaborating with our dealers to enhance our rental business. We established a new division about a year ago, led by a Senior Vice President, to boost rental activities. The rental industry is indeed on the rise, and we have been revising our rental growth strategy to enable our dealers to grow their rental revenue more sustainably. We believe this is a significant opportunity for us to focus on.
Operator
And we will take our next question from Kristen Owen with Oppenheimer. Your line is open.
Speaker
Great, good morning. Thank you for the question. Jim Umpleby (Chairman): Hey, Kristen.
Speaker
I was wondering if you could elaborate on the increase in manufacturing costs for the quarter and how we should interpret that moving forward. This quarter presents the easiest comparison of the year and occurs in a more favorable cost environment. I'm trying to understand how much of the manufacturing cost increase might be attributed to the timing of orders compared to ongoing inflation in the supply chain. Andrew Bonfield (CFO): We are experiencing a mixed situation across our businesses. Material costs continue to rise in some sectors, while others are experiencing slower growth. This trend significantly affects our overall manufacturing costs. Additionally, in Resource Industries, for instance, absorption has been a factor for us this quarter, as we built inventory last year but have seen reductions this year. Overall, we are witnessing lower levels of manufacturing cost inflation than historically, partially offset by some freight benefits. It's important to note that this varies significantly by segment. We are not a uniform business serving just one market; instead, we cater to various markets that are at different stages of recovery post-COVID. Consequently, some businesses are experiencing cost increases differently, and our pricing strategies are also being adjusted to mitigate some of these costs.
Operator
And we will take our next question from Mig Dobre with Baird. Your line is open.
Speaker
Yes. Thank you. Good morning. I wanted to ask a question surrounding dealer inventories. They built $2.6 billion year-to-date, which seems to be a little bit different than the way you were framing expectations. So I guess I'm curious, first, how do you expect dealer inventory still exiting 2023? Why is there a bit of a variance relative to your initial expectations? And lastly, if we are indeed going into a bit of a dealer destock mode, does it stand to infer that your incoming orders are going to continue to be soft and, obviously, backlog continues to erode? Thank you. Andrew Bonfield (CFO): Certainly. Here is the rewritten Earnings Call remark: We want to clarify a few points regarding dealer inventory. We provide a single figure for 150 independent dealers, which includes a vast variety of products, making it quite complex. CI operates under a slightly different model compared to RI and E&T, with the latter two accounting for about 40% of the increase in dealer inventory, primarily due to commissioning. Over 70% of those orders correspond to firm customer commitments rather than products sitting in stock waiting for buyers. This makes it more challenging to predict because it relies on commissioning timelines and the unique nature of certain products, such as large mining trucks that are disassembled and reassembled on site, which affects revenue recognition through the dealer. Hence, predicting this segment is quite uncertain. As for CI, we generally indicate that a normal inventory range is between three to four months, and currently, we are operating within that range. Dealers with excavators are on the higher end of that range and are looking to reduce it, which we agree is a positive move. For BCP and earthmoving sectors, particularly in North America, we are at the lower end of that range and dealers might prefer to hold slightly more inventory. Overall, we anticipate a reduction in inventory during the fourth quarter, potentially impacting us, but we don't expect a significant effect in the first quarter of next year. Typically, dealers build inventory in the first quarter ahead of the summer selling season, though this year it may not be as substantial as usual. Regarding backlog, it's important to remember that for CI, backlog reflects dealer orders, while for E&T and RI, it mainly hinges on firm customer orders. As dealers improve their machine availability, they wonβt need to place orders as far in advance. Our S&OP process has aimed to manage overordering better, reducing production fluctuations driven by dealer purchasing patterns. Lastly, we still expect sales to end users to grow in the fourth quarter, with strong end demand anticipated heading into 2024.
Operator
And we will take our next question from Mike Shlisky with D.A. Davidson. Your line is open.
Speaker
Yes, hi, good morning. Jim Umpleby (Chairman): Good morning.
Speaker
I wanted to ask about interest rates briefly. Thank you, yes, hello. Regarding interest rates, you touched on it, but could you provide a bit more detail? How have higher interest rates impacted the dealerships' desire for inventory and their ability to purchase and hold inventory? Additionally, have these interest rates influenced the willingness of end users to buy equipment? Andrew Bonfield (CFO): First of all, regarding higher interest rates, I want to emphasize that while many of us remember interest rates around 5% as being typical, we've experienced much lower rates for the past decade. The situation largely depends on dealers' inventory levels, which are influenced by their expectations of future demand. Currently, they seem comfortable maintaining their existing inventories, particularly for BCP and earthmoving products, while reducing inventory for excavators. This adjustment reflects their sales expectations rather than interest rates. Overall, they appear to be less affected by interest rates, assuming they can sell their equipment. For Caterpillar, the impact is more noticeable in our Cat Financial segment, where we've observed a slight decrease in the proportion of new machines financed by us due to our funding model in the wholesale market, making us less competitive compared to banks. Nevertheless, customers are still purchasing machines, often with cash, as they need to continue operations and are not heavily influenced by interest rates. We closely monitor write-offs, past dues, and provision levels, and our customers remain in strong financial health, showing no signs of being affected by the recent increase in interest rates at this point.
Operator
We will take our next question from Jerry Revich with Goldman Sachs. Your line is open.
Speaker
Yes, hi, good morning, everyone. Jim Umpleby (Chairman): Hi, Jerry.
Speaker
Jim, I'm wondering if you could just talk about where lead times stand in mining equipment. I know it's a broad range of products, but can you get us a sense for how far visibility you have? And if you're willing to quantify the comments you made earlier about really good pipeline just within the context of relative to the really strong bookings rate we've had year-to-date, any way to quantify the pipeline versus the bookings run rate we've been at? Thank you. Jim Umpleby (Chairman): Yeah. So we have been working hard to bring lead times down, as I mentioned. We do feel good about where we are in that process. And so we had over the last couple of years, some real challenges around availability, but it has gotten better in most areas. Probably the area that's still a challenge is large engines. But in mining we do feel good about where we are in terms of the progress we've made around lead times. Andrew Bonfield (CFO): There is a lot of quoting activity happening. However, we had hoped to see more of that reflected in our order rates. It appears there has been a slight delay in making firm orders. Ryan Fiedler (Head of Investor Relations): Abby, we have time for one more question.
Operator
Thank you. Today's final question will come from the line of Steve Volkmann with Jefferies. Your line is open.
Speaker
Great. Good morning, everybody. Thanks for fitting me in. I just wanted to go back to rental, if I could. And I'm curious, Jim, would you characterize the Cat dealer rental fleets in terms of size? Do they want more equipment? And can you also just comment on what you think the age would be in that Cat rental fleet? Jim Umpleby (Chairman): One of the developments over the past year is the upgrading of our rental fleet, which had aged due to some supply challenges. I hesitate to define the overall size precisely. We are collaborating with our dealers to enhance their rental offerings, aiming for successful and profitable rental businesses. This entails having an adequate rental inventory that aligns with their business operations. While the fleet has shown some improvement, there remains potential for introducing newer machines, as it had become quite outdated. Our plan is that as we expand rental operations, the fleet should also expand. However, the focus should not solely be on increasing the size of rental fleets. The objective is to ensure our dealers run profitable and growing rental businesses, and they strive for efficiency regarding equipment turnover. Ultimately, this should lead to larger rental fleets over time. All right. Well, thank you. That was our last question. Thanks all for joining us, and we always appreciate your questions. I'd like to just close by thanking our team for another great quarter. As I mentioned earlier, due to our strong results in the third quarter, we now do believe that 2023 will be even better than we had previously anticipated during our last call, and that includes higher full year expectations for adjusted operating profit margin and ME&T free cash flow. And that reflects continuing healthy customer demand and our strong operating performance. And we're continuing to execute our strategy and investor long-term profitable growth. And we look forward to updating you again in January. Ryan Fiedler (Head of Investor Relations): Great. Thanks, Jim, Andrew, and everyone who joined us today. A replay of our call will be available online later this morning. We'll also post a transcript on our Investor Relations website as soon as it's available. You'll also find the third quarter results video with our CFO and an SEC filing with our sales to users data. Click on investors.caterpillar.com then click on Financials to view those materials. If you have any questions, please reach out to Rob or me. The general phone number is (309) 675-4549. Now we'll turn it over to Abby to conclude the call.
Operator
Thank you. Ladies and gentlemen, this concludes today's call. We thank you for your participation. You may all disconnect.
Need more earnings data?
Explore more earnings information and financial data for CAT
Transcript sourced from Financial Modeling Prep (FMP)